The best choice for the hottest high-speed broadba

  • Detail


is the best choice for high-speed broadband transmission. At the same time, it is the substitution of in3 synthetic materials for imports. It continues to steadily promote the Tel Communications Alliance (ICA) member and the main member of PICMG. Since its establishment, Weida Electric Industrial Computer Co., Ltd. (IEI technology cor3, bellows ring stiffness tester P. before startup) has always adhered to the spirit of product innovation and rapid service, and has maintained close cooperation with Intel, the leading chip manufacturer for a long time, Continuously develop new technologies and products. This time, Intel strongly promotes the PCI Express high-speed bandwidth transmission technology in the aspect of bandwidth transmission. It happens to coincide with the research and development strategy of IEI's product line. Therefore, IEI will publish a PICMG PCI Express Gigabit Ethernet single board motherboard "rocky-6161eg-r10" in August2005

iei 『 rocky-6161eg-r10 』 mainly adopts socket 478, which can be upgraded to 800hmz processor at most. It is equipped with Intel graphics media accelerator (GMA) 900, which can support wide screen LCD display and accelerate the five-year long-term supply of directx* 9 to ensure Intel? 915gv chip. In addition, Intel 915gv chipset integrates inte high fax sound effect and inte matrix storage technology. In terms of memory, "rocky-6161eg-r10" retains two sets of 184 PI. If it can be recycled after taking certain technical measures, n DIMM socket supports dual channel ddr333/400 SDRAM, which can be increased to 2GB at most. The motherboard contains 2x RS-232 and 1x LPT, 8x USB2.0, 1x ultra ATA 100 IDE interface, 1x SATA 150 interface. In addition, it also provides compact flash II socket interface and atx-12v power connector to meet the needs of different applications. More importantly, IEI provides a perfect long-term supply guarantee service for embedded system customers

the best choice for high-speed broadband transmission

iei in order to improve the "rocky-6161eg-r10" PCI Express high-speed broadband transmission interface, Marvell Yukon EC 88e8053 PCI Express chip is adopted. This 88e8053 chip uses a very small size package. It is a high-performance and low power consumption Gigabit Ethernet (GBE) solution, as well as a high reliability and high stability solution. It is fully compatible with PCI Express 1.0A specification, It integrates Marvell Alaska PHY transceiver and robust GBE media access control (MAC), and integrates 48KB packet temporary memory. Yukon EC 88e8053 supports a variety of motherboard platforms, which is optimized for LOM and NIC solutions. This is the first product to realize 9mm x 9mm, low Ping (64 pin) encapsulation. It provides offline virtual cable test (VCT) technology, and can also reduce the cost of network installation and support. It is the best choice for PCI Express Gigabit Ethernet solutions

"rocky-6161eg-r10" main features:

● Intel long term support product

● Intel P4/Prescott/Celeron CPU supports up to FSB 800 mhz

● Intel gma900 graphic accelerator

● dual channel DDR400 SDRAM memory support

● high performance PCI Express Gigabit Ethernet controller

core faweida Electronics (Shanghai) Co., Ltd.

No. 515, Shenfu Road, Xinzhuang Industrial Zone, Minhang, Shanghai


Copyright © 2011 JIN SHI